V23.03 version is by far the smallest high power laser cleaner, CKD-PLFC-100 V23.03 can move flexibly working position, and the cleaning head is very light weight and small, which greatly reduces the workload of workers.
Compared with other types of laser cleaning machine, it has the advantages that:
- The cleaning result is smoother.
- No obvious scratches are left.
- The bottom layer material can be protected without being damaged
The whole operation process is quite simple, press down the button to clean.
The entire structure uses high-end optical lenses with a transmittance of over 97%, and laser scanning speeds of up to 12,000 mm per second.
Its application scope includes, but is not limited to: Clean the metal surface of the rust, dirt, oil stains, dust, spray layer, ink polluted face, etc. can be used in metal fittings industry, cultural relics restoration industry, precision electronics industry and so on.
Compared with other laser cleaner:
(1) CKD-PLFC V23.03 can keep the cleaned surface smooth, which is good for mould cleaning, such as moulds for glass wine bottles, trophy moulds and precision instruments, even can be used for surface polish for some thin polluted layer.
(2) CKD-PLFC V23.03 can clean uneven face well and avoid the small drops being smoothed out for some precision devices. While if by other laser removing machines, although it cleaned the surface of the material, the surface of the edges and the drops had also been flatted.
(3) CKD-PLFC V23.03 can adjusts pulse width according to the slight difference of the material, small hot melting area without burning the base material. The peak power is much higher than common laser cleaner, remove surface in a quiet short time like a sharp scalpel, without damaging the underlay.
(4) CKD-PLFC V23.03 can clean without badly scratch lines, not only remove dirt, but also beauty repaired face.
Wireless control: The whole machine can be easily controller by a mini controller that is smaller than hand, users can save their normally using data and quickly acquire in the future. There are multiple cleaning models: Straight line/rectangle /X direction /Y. Users can conveniently adjust cleaning length, speed and so on.
The whole machine is very small for 100W big power laser.
Super silent.
Operation procedure is very simple.
Can move the working position freely.
The laser cable is 3 meter long, conveniently clean big or tall material.
It's designed meet kinds of standard in different area, including international standard, CE standard and FDA standard.
CONFIGURATION:
Parameter |
Unit |
CKD-PLFC-100 |
CKD-PLFC-200 |
CKD-PLFC-350 |
Laser wavelength |
nm |
1064 |
Laser source |
|
MOPA fiber laser source (High specification pulse fiber laser source) |
Laser power |
W |
100W |
200W |
350W |
Cleaning speed |
mm/s |
1-12,000 |
Fiber cable |
m |
3 |
Dimension |
cm |
28*47*60 |
|
Net weight |
Kg |
55 |
60 |
Clean scope |
|
Rust, dusty, oil, ink… |
Clean material |
|
Metal and some non-metal |